11 novembre, 2015
When the wind blows strong change, some build shelters, others build windmills! GOOD MORNING !!
With the NC (normally closed) valve version and dropped out solenoid, the oil flow is stopped. When the solenoid is energized the flow is free both. Aluminium body
3 ways diverter valves is used to divert the flow towards 2 different outlets. MAX FLOW3/8" 35 lt/min MAX FLOW1/2" 60 lt/min MAX FLOW3/4" 100 lt/min MAX FLOW1" 180 lt/min MAX PRESSURE 250 BAR
Ball valves can turn between open or closed position even under max pressure. Steel body - Zinc plated - No leakage - Valve can turn with max pressure.
Alluminium with protection boot lever pivot box; it can be rotated 180°
With the NA (normally opened) valve version and dropped-out solenoid, the oil flow is free. When the solenoid is energized the flow is stopped. When the solenoid is energized the flow is free both. Aluminium body
This valve adjusts the flow speed in one direction. In the opposite direction the flow is free. THREAD: BSP 3/8" BSP 1/2" BSP 3/4"
Pistone DBM 5 part composite double acting seal Size 70x50x22.40
Pistone DBM 5 part composite double acting seal Size 45x35x16.4
Flow is free in one direction and is blocked in the opposite Zinc plated steel body - Hardened internal components made of steel - No leakage.
3 way ball valve is used to connect inlet flow to two ports .. This special hydraulic scheme is able to control a single action actuator. Steel body - Zinc plated - No leakage - Turns with max pressure - Counter pressure to closed port cannot be applied
Flexible cable and galvanized steel with swivel hook that prevents the turning of the cable and welded ends.
Reducers series "UZRR" are produced in two different models: type UZRRH, fit for in-line or panel mounting and type UZRRM, fit for panel mounting or modular assembly (with filter and lubricator).Both the two models are available with different scales of regulation and with connections G 1/4.
COMMON FEATURESMedia: water, oil, airMedia temperature: -10°C ÷ +90°CAmbient temperature: -10°C ÷ +50°CBody material: brass (CW617N EN 12165)Operator material: stainless steelOperator seal and diaphragm material: NBRProtection class: IP 65 (with connector and gasket)
The direct acting solenoid valves series "UL" are produced in conformity with the Directives EC 89/336, EC 92/31, EC 93/68, EC 73/23 in the 3/2 N.O. (with feed from the exhaust "3") and 3/2 N.C. pneumatic functions. The function 2/2 is obtainable closing exhaust "3"
Pneumatics Cylinders Waircom comply with ISO 15552 standard. End caps Alluminium alloy, cataphoresis-treated Cylinder barrel extruded profile, 20 µm anodized allumium alloy Seals NBR rubber Viton
Pneumatics Cylinders Waircom comply with ISO 15552 standard. End caps Alluminium alloy, cataphoresis-treated Cylinder barrel extruded profile, 20 µm anodized allumium alloy Seals NBR rubber Viton
Steel body .Zinc plated.Hardened internal components. OR seal on the pilot piston. No leakage.
Hydraulic lubricating oil for hydraulic systems and various applications, with anti-corrosion additives, anti-wear, anti-oxidation. Hydraulic oil ISO VG 46 viscosity (viscosity average, typical of the most common applications).
Seals for stem POLYPAC BALSEL compact single effect rubber seal
3 ways diverter valves is used to divert the flow towards 2 different outlets. MAX FLOW3/8" 35 lt/min MAX FLOW1/2" 60 lt/min MAX FLOW3/4" 100 lt/min MAX FLOW1" 180 lt/min MAX PRESSURE 250 BAR
The direct acting solenoid valves series "UL" are produced in conformity with the Directives EC 89/336, EC 92/31, EC 93/68, EC 73/23 in the 3/2 N.O. (with feed from the exhaust "3") and 3/2 N.C. pneumatic functions. The function 2/2 is obtainable closing exhaust "3"
11 novembre, 2015
When the wind blows strong change, some build shelters, others build windmills! GOOD MORNING !!
Subscribe to the Tecnologia Oleodinamica mailing list to receive updates on new arrivals, special offers and other discount information.
Designed by Massive-Web
Copyright © 2015 Tecnologia Oleodinamica Srl | All rights reserved
Follow us