RECOVERY HYDRAULIC WINCH COME UP HV-10

€1,449.00
Tax excluded
COME UP HV-10

RECOVERY HYDRAULIC WINCH COME UP HV-10 45000 kg COMPLETE WITH 25 METERS ROPE

Quantity

Description
  • Powered by a PTO/power take off unit driven pump
  • Fast and variable recovery speeds for high work rate
  • Highly efficient and constant operating torque motor
  • 2 stage planetary gear train for greater pulling force
  • Turn clutch by ergonomic T-handle for rapid wire rope payout
  • Drag brake and over center valve providing complete braking
  • EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery
  • Meets SAE J706, CE machinery directive 2006/42/EC and EN 14492-1:2006 Power Driven Winches

Specifications:

  • Part number: 
    PN 682546 (Std. drum)
    PN 683129 (Std. drum - Clutch in left side)
  • Rated line pull:
    4,535 kg / 10,000 lb (SAE J706 rating) 
    4,300 kg (EN 14492-1 rating)
  • Line speed (at 1st layer of rope) : 
    14 mpm at 60 l/min (46 fpm at 15.9 g/min)
  • Operation pressure: 150 bar / 2,175 psi
  • Max oil flow: 60 l/min (15.9 g/min)
  • Hydraulic motor: 97.3 cm3/rev (5.9 in3/rev)
  • Gear ratio: 2-stage planetary gear 16:1 
  • Winch construction: Aluminum die cast housings with steel drum
  • Clutch (Freespooling): Rotating ring gear
  • Brake: Spring applied drag brake together with over-center valve supplied
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Drum barrel diameter: 102 mm (4")
  • Drum flange diameter: 201.5 mm (7.9”)
  • Distance between flanges: 253 mm (10") 
  • Mounting bolt pattern: 
    291.6 x 171.2 mm (11.5” x 6.7”)
    374.2 x 114 mm (14.7” x 4.5”)
  • Wire rope recommended: 
    11 mm x 27 m (7/16" x 89'), 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 84.4 kN (18,939 lbf) required for SAE J706 and EN 14492-1 ratings.
  • Winch weight: 37 kg / 81.4 lb
  • Gross weight: 46.6 kg / 102.5 lb 
  • Box dimension, (L x D x H) : 680 x 380 x 300 mm (26.8" x 15" x 11.8")

    Compliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.
    * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Line Pull and Rope Capacity
Line Speed
Layer of Wire Rope
Pull by layer,
kg / lb
Total Rope on the Drum, m / ft
at 60 l/min (15.9 g/min),
mpm / fpm
1st
4,535 / 10,000
8.0 / 26.2
14.0 / 46.0
2nd
3,796 / 8,369
17.5 / 57.4
16.3 / 53.5
3rd
3,264 / 7,196
27.0 / 89.0
19.0 / 62.3
.0

 Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Dimension, mm/in:

Hydraulic System Installation:

Accessory:

  • 245 mm throat roller fairlead
  • Over center valve
COME UP HV-10
2021-07-01

No customer reviews for the moment.

close Shopping Cart
close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password