RECOVERY HYDRAULIC WINCH COME UP HV-10
RECOVERY HYDRAULIC WINCH COME UP HV-10 45000 kg COMPLETE WITH 25 METERS ROPE
Description
- Powered by a PTO/power take off unit driven pump
- Fast and variable recovery speeds for high work rate
- Highly efficient and constant operating torque motor
- 2 stage planetary gear train for greater pulling force
- Turn clutch by ergonomic T-handle for rapid wire rope payout
- Drag brake and over center valve providing complete braking
- EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery
- Meets SAE J706, CE machinery directive 2006/42/EC and EN 14492-1:2006 Power Driven Winches
Specifications:
- Part number:
PN 682546 (Std. drum)
PN 683129 (Std. drum - Clutch in left side) - Rated line pull:
4,535 kg / 10,000 lb (SAE J706 rating)
4,300 kg (EN 14492-1 rating) - Line speed (at 1st layer of rope) :
14 mpm at 60 l/min (46 fpm at 15.9 g/min) - Operation pressure: 150 bar / 2,175 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 97.3 cm3/rev (5.9 in3/rev)
- Gear ratio: 2-stage planetary gear 16:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Rotating ring gear
- Brake: Spring applied drag brake together with over-center valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 102 mm (4")
- Drum flange diameter: 201.5 mm (7.9”)
- Distance between flanges: 253 mm (10")
- Mounting bolt pattern:
291.6 x 171.2 mm (11.5” x 6.7”)
374.2 x 114 mm (14.7” x 4.5”) - Wire rope recommended:
11 mm x 27 m (7/16" x 89'), 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 84.4 kN (18,939 lbf) required for SAE J706 and EN 14492-1 ratings. - Winch weight: 37 kg / 81.4 lb
- Gross weight: 46.6 kg / 102.5 lb
- Box dimension, (L x D x H) : 680 x 380 x 300 mm (26.8" x 15" x 11.8")
Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.
* Drum freeboard shall be at least 1.5 x rope diameter
Performance Data:
Line Pull and Rope Capacity
|
Line Speed
|
||
Layer of Wire Rope
|
Pull by layer,
kg / lb |
Total Rope on the Drum, m / ft
|
at 60 l/min (15.9 g/min),
mpm / fpm |
1st
|
4,535 / 10,000
|
8.0 / 26.2
|
14.0 / 46.0
|
2nd
|
3,796 / 8,369
|
17.5 / 57.4
|
16.3 / 53.5
|
3rd
|
3,264 / 7,196
|
27.0 / 89.0
|
19.0 / 62.3
|
Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.
Dimension, mm/in:
Hydraulic System Installation:
Accessory:
- 245 mm throat roller fairlead
- Over center valve
No customer reviews for the moment.