• New

RECOVERY HYDRAULIC WINCH COME UP HV-8

€1,177.00
COME UP HV-8
5 Items

RECOVERY HYDRAULIC WINCH COME UP HV-8 36000 kg COMPLETE WITH 25 METERS ROPE

Description

Powered by a PTO / power take off unit driven pump

Fast and variable recovery speeds for high work rate

Highly efficient and constant operating torque motor

2 stage planetary gear train for greater pulling force

Turn clutch by ergonomic T-handle for rapid wire rope payout

Drag brake and over center valve providing complete braking

EN 14492-1 supported: 10: 1 D / d ratio and 2: 1 wire rope strength allow severe duty vehicles and commercial recovery

Meets SAE J706, CE Machinery Directive 2006/42 / EC and support EN 14492-1: 2006 Power Driven Winches.

Specifications:

Part number:

PN 680816 (Std. Drum)

PN 681091 (Long drum)

PN 681123 (Std. Drum - Clutch in left side)

PN 681347 (Long drum - Clutch in left side)

Rated line pull:

3,630 kg / 8,000 lb (SAE J706 rating)

3,560 kg (EN 14492-1 rating)

Line speed (at 1st layer of rope):

15 mpm at 60 l / min (49 fpm at 15.9 g / min)

Operation pressure: 150 bar / 2,175 psi

Max oil flow: 60 l / min (15.9 g / min)

Hydraulic motor: 77.8 cm3 / rev (4.7 in3 / rev)

Gear ratio: 2-stage planetary gear 16: 1

Winch construction: Aluminum die cast housings with steel drum

Clutch (Freespooling): Rotating ring gear

Brake: Spring applied drag brake together with over-center valve supplied

Rotation of winch: Wire rope shall be under-wound orientation only

Drum barrel diameter: 90 mm (3.5 ")

Drum flange diameter: 201.5 mm (7.9 ")

Distance between flanges:

190 mm (7.5 ") - Std. Drum

253 mm (10 ") - Long drum

Mounting bolt pattern:

228.6 x 171.2 mm (9 "x 6.7"); 311.2 x 114.3 mm (12.3 "x 4.5") - Std. Drum

291.6 x 171.2 mm (11.5 "x 6.7"); 374.2 x 114.3 mm (14.7 "x 4.5") - Long drum

Wire rope recommended:

10 mm x 30.5 m (3/8 "x 100 ') for Std. Drum and 40 m (131') for Long drum, 1,960 N / mm2 (EIPS) grade with a minimum breaking strength of 69.8 kN (15,663 lbf) required .for SAE J706 and EN 14492-1 ratings

Winch weight:

35.5 kg / 78.1 lb - Std. Drum

37.5 kg / 82.7 lb - Long drum

Gross weight:

43.3 kg / 95.3 lb - Std. Drum

45.3 kg / 99.9 lb - Long drum

Box dimension, (L x D x H):

615 x 380 x 300 mm (24.2 "x 15" x 11.8 ") - Std.drum

665 x 370 x 285 mm (26.2 "x 14.6" x 11.2 ") - Long drum

Compliant with EN 14492-1 requirements for vehicle recovery winch:

* The working coefficient for the first rope layer on the drum shall be at least 2.

* The D / d ratio to the center of the rope shall be at least 10 for the drum.

* Drum freeboard shall be at least 1.5 x rope diameter

Performance Data:

Line Pull and Rope Capacity Line Speed

Layer of Wire Rope

Pull by layer,

kg / lb

Total Rope on the Drum, m / ft

at 60 l / min (15.9 g / min),

mpm / fpm

Std. Drum

Long drum

1st

3,630 / 8,000

5.8 / 19.0

 7.8 / 25.6 15.0 / 49.0

2nd

3.025 / 6.669

12.8 / 42.0

 17.1 / 56.1 18.2 / 59.7

3rd

2.593 / 5.717

20.9 / 68.6

 28.0 / 91.9 21.2 / 69.6

4th

2.269 / 5.002

30.5 / 100

 40/131 24.2 / 79.4

Warning

* The winch is not intended to be used in any manner for the movement or lifting of personnel.

* The rated line pull shown is based on the first layer of rope on the drum.

* The rope winding on the drum shall remain 5 wraps from the drum.

Dimension, mm / in:

 

 

Hydraulic System Installation:

Accessory:

179 mm throat roller fairlead for Std. Drum

245 mm throat roller fairlead for Long drum

Over center valve

COME UP HV-8
5 Items

No customer reviews for the moment.

You might also like

close Shopping Cart
close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password